Page 1 of 1

building a basking area

PostPosted: Fri Aug 18, 2006 9:38 pm
by painted patience
I am upgrading my two RES to a 55 gallon tank - which is all the room I have right now. I would like to build a basking area outside of the tank with a ramp leading up to it ( I have seen pictures of this in some members setups but I forget where ). Does anyone have a picture of theirs with instructions I can look at ? Thank you - it would give so much more room for Lady and tramp.
:)

PostPosted: Fri Aug 18, 2006 11:21 pm
by missibsu
Try this link, and the pics you want are in the second and third sets
http://www.redearslider.com/forum/viewt ... sking+area

PostPosted: Sun Aug 20, 2006 9:20 pm
by painted patience
thank you so much ! This is exactly what I wanted( The one for the 90 gallon ) . Now to get my handyman brother-in-law to design it !. How do you clean it ? Does it just lift off and you rinse it out?
Thanks again !

PostPosted: Sun Aug 20, 2006 10:53 pm
by missibsu
That isn't my design, you'd have to go to that post and ask that person. I would think it could be hosed.

PostPosted: Mon Aug 21, 2006 2:24 am
by Spookster
painted patience wrote:thank you so much ! This is exactly what I wanted( The one for the 90 gallon ) . Now to get my handyman brother-in-law to design it !. How do you clean it ? Does it just lift off and you rinse it out?
Thanks again !


Yes it lifts right off. I designed it so that it fits the inside lip of the top of the tank. I have made a few design changes to that one since then. I replaced the wooden ramp with a longer plexiglass one because the wood was starting to erode even though I sealed it. I also siliconed the shelving liner to the plexiglass. I also added a third bracket in the middle because our turtle loves to sit on the ramp and she is about 9 inches now. She really loves it.

And i've never had to clean it. It doesn't get dirty.

And here is some additional information that I provided to others on how I built it
http://www.redearslider.com/forum/viewtopic.php?t=3504

PostPosted: Mon Aug 21, 2006 10:03 pm
by steve
Spookster, I'm gonna need some of your pics when the new content of the site goes up ;)

PostPosted: Mon Aug 21, 2006 10:19 pm
by cprcheetah
My hubby is going to make a hood for the lights, and then a basking spot on top, sort of...it's kind of complicated, but I will definately post pictures once it's all done.

PostPosted: Mon Aug 21, 2006 10:20 pm
by Kallistos
Spookster if you made those in bulk there'd be lines of people wanting to buy it. You should think about it :D make a few extra buck here and there

PostPosted: Tue Aug 22, 2006 2:18 am
by Spookster
steve wrote:Spookster, I'm gonna need some of your pics when the new content of the site goes up ;)


No problem. I'll take some newer ones with the latest enhancements. I'm out of town on a business trip right now but i'll be back home in a couple of weeks.

PostPosted: Tue Aug 22, 2006 2:21 am
by Spookster
RESowner34 wrote:Spookster if you made those in bulk there'd be lines of people wanting to buy it. You should think about it :D make a few extra buck here and there


lol I don't know about that now.

PostPosted: Mon Sep 11, 2006 10:33 am
by painted patience
ok I have all the materials and Brother-in-law to help build it, will post pictures when done. This is so needed,, Lady and Tramp wiegh down the large size ramp ( that you suction onto the glass ) and practically are falling into the water when basking.

PostPosted: Mon Sep 11, 2006 3:28 pm
by Shavannah
Good luck! :)
It's kind of fun building your own! Can't wait to see the pics!

PostPosted: Tue Sep 12, 2006 2:17 am
by SpotsMama
I am in awe of the talented people that build such useful things!