Habitat - Indoor :: Filter for 100 gallon Rubbermaid

Turtle tank setups and other indoor configurations.

Post Posted: Sun May 11, 2014 6:19 am   Re: Filter for 100 gallon Rubbermaid

You have Carpenter skills! One thing I did with the fx is keep the outlet of the filter close to the top of the tank so it will purge when it shuts off for purging. It won't leak. Your going to put a piece of wood on the open end right? Will make it lots stronger! Looks great.
1 Male Mississippi Map/Mississippi
1 Female RES/Slidy.
1 DBT White Concentric Female/ Lucky
1 DBT Male/ Spots
(Housed in the same tank)

300 gallon indoor stock tank, FX6 & FX5 filters. Mega-Ray 100w UVB bulb.
User avatar
Kansasslider
 
Posts: 3043
Joined: May 10, 2012
Location: Manhattan,Kansas.
Gender: Male

Post Posted: Sun May 11, 2014 9:44 am   Re: Filter for 100 gallon Rubbermaid

Now I'm thinking if my floor will support all this weight.
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Sun May 11, 2014 9:46 am   Re: Filter for 100 gallon Rubbermaid

Thank you but yours is much better looking
Nope, not a piece of wood, a shelf. I had them cut all wood and left leftovers there, didn't think of the openings. So will put a shelf there, I have an extra one.


But I'm on a third floor of a building. This thing will weigh over a ton. I'm getting scared))))
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Sun May 11, 2014 11:13 am   Re: Filter for 100 gallon Rubbermaid

Just the water alone will be 835 pounds. Hope for strong floors.
1 Male Mississippi Map/Mississippi
1 Female RES/Slidy.
1 DBT White Concentric Female/ Lucky
1 DBT Male/ Spots
(Housed in the same tank)

300 gallon indoor stock tank, FX6 & FX5 filters. Mega-Ray 100w UVB bulb.
User avatar
Kansasslider
 
Posts: 3043
Joined: May 10, 2012
Location: Manhattan,Kansas.
Gender: Male

Post Posted: Sun May 11, 2014 11:17 am   Re: Filter for 100 gallon Rubbermaid

For the piece of wood on the side. Correct me if I'm wrong but it's purely cosmetic, no? As far as I understand, it adds nothing in terms of strength. My 2x12 and the plywood are exactly the same length, so the side piece will hang on to the 2x12. How will it add to strength?

If I didn't have cats and didnt want to prevent them from going inside I wouldn't even bother. I'm leaving one side open because it will be against a wall and closing the other.

Also, what do your mean by putting the filter close to outlet so that if it purges then it purges in the tank? First of all, how does the distance to the outlet affect anything. And second, if both tubes go in the tank, where else would it purge to?
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Sun May 11, 2014 11:17 am   Re: Filter for 100 gallon Rubbermaid

Kansasslider wrote:Just the water alone will be 835 pounds. Hope for strong floors.

Thank you))))) I feel sooo much better now


But seriously, after I wrote that I looked around and realized that in that spot I now I have 250 lbs of litter, 300 lbs of meat for my dog and a dresser with a bunch of useless stuff. So another 200?

I won't fill my tank all the way up, I will fill it just enough to be high enough for the filter

My floors are crooked, like slanted an inch or so. Does it matter?
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Sun May 11, 2014 12:41 pm   Re: Filter for 100 gallon Rubbermaid

The neat thing about a stock tank is that it doesn't need to be perfectly level. I'd make sure the canister is though.
User avatar
steve
Site Admin
 
Posts: 31430
Joined: Apr 11, 2005
Location: New York, NY
Gender: Male

Post Posted: Sun May 11, 2014 3:53 pm   Re: Filter for 100 gallon Rubbermaid

That'd be no problem)))) much easier to level the canister

What are the chances of the fx6 leaking? That's my main worry for now. That and the floors caving in
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Mon May 12, 2014 4:35 am   Re: Filter for 100 gallon Rubbermaid

The fx shouldn't leak but we are dealing with water. I do weekly water changes because I feed in tank and also have large goldfish. Trying to keep nitrates in check. What I'm talking about as far as the filter outlet is with my fx5 it wouldn't let the air out of the filter with it located at the bottom of the tank. The fx6 turns itself off 2x a day to purge air. You might be OK because your stand is taller than mine. I had to locate the output just under the water surface so the air could escape. If the outlet is too deep under water there is too much pressure to let the air out.
1 Male Mississippi Map/Mississippi
1 Female RES/Slidy.
1 DBT White Concentric Female/ Lucky
1 DBT Male/ Spots
(Housed in the same tank)

300 gallon indoor stock tank, FX6 & FX5 filters. Mega-Ray 100w UVB bulb.
User avatar
Kansasslider
 
Posts: 3043
Joined: May 10, 2012
Location: Manhattan,Kansas.
Gender: Male

Post Posted: Mon May 12, 2014 9:52 am   Re: Filter for 100 gallon Rubbermaid

You can make your own canister filter. All you need is a 5, or 7 gallon bucket, and a pump. I recommend 250 GPH+. It would probably be less than $100. Here's mine:

https://www.youtube.com/watch?v=Ek5TOCqTOuI
1 F RES 9" (Kingler)
1 F Belize Slider 7" (Agamemnon)
My Youtube Channel:
http://www.youtube.com/user/condorboy1/videos
User avatar
Linus
 
Posts: 1260
Joined: Jul 31, 2008
Location: Los Angeles
Gender: Male

Post Posted: Mon May 12, 2014 3:09 pm   Re: Filter for 100 gallon Rubbermaid

I also keep my canisters in an open storage container. It'll contain a small leak if I catch it in time. If you're very paranoid about, maybe add a small alarm the goes off when it's wet.
User avatar
steve
Site Admin
 
Posts: 31430
Joined: Apr 11, 2005
Location: New York, NY
Gender: Male

Post Posted: Mon May 12, 2014 7:31 pm   Re: Filter for 100 gallon Rubbermaid

Omg I can't catch a break. I set everything up, will post pics in a few and a freaking drain is leaking. Not where the plug is but around it, where the o ring is.

Damn!!!!!

Lol anyway))))) on my way to hardware store to buy a wrench and open the thing.

I will reply about the filters and stuff once fixed. I still have questions.

And I couldn't make my own canister filter.

And my stand is taller but I'm not filling it all the way up so I'm not winning anything
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Mon May 12, 2014 7:34 pm   Re: Filter for 100 gallon Rubbermaid

Image

Image

Not done yet. Will lay fake grass and maybe fix up the ramp. He won't be able to climb it
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Mon May 12, 2014 7:44 pm   Re: Filter for 100 gallon Rubbermaid

Any ideas for the ramp? Right now it's acrylic sheet with some tiny holes drilled. I'm thinking of siliconing some plastic pieces to it to make a staircase

This is a project and a half. I spent 1000 already and an entire weekend
Lalachka
 
Posts: 58
Joined: May 5, 2014
Gender: Female

Post Posted: Mon May 12, 2014 7:59 pm   Re: Filter for 100 gallon Rubbermaid

First of all calm down. The drains on the Rubbermaid tanks suck. I fixed mine with a new better one and have a post on it somewhere. I will look for it. Pissed me off 2! Brand new tank leaking drain. Its a crappy design! Lookin good slow down breath and stop to smell the flowers. Hey it helps. Sometimes I just need to stop working and relax! I will try to find my post on how to fix that drain in the morning. Bone tired!!oh yea I have a 40 gal tank upstairs at my house and the filter sits in a 40 gallon tub. Just in case!
1 Male Mississippi Map/Mississippi
1 Female RES/Slidy.
1 DBT White Concentric Female/ Lucky
1 DBT Male/ Spots
(Housed in the same tank)

300 gallon indoor stock tank, FX6 & FX5 filters. Mega-Ray 100w UVB bulb.
User avatar
Kansasslider
 
Posts: 3043
Joined: May 10, 2012
Location: Manhattan,Kansas.
Gender: Male

PreviousNext

Return to Habitat - Indoor

Who is online

Users browsing this forum: No registered users and 22 guests