Habitat - Indoor :: Turtle-needs help

Turtle tank setups and other indoor configurations.

Post Posted: Mon Jan 23, 2006 3:11 pm   Turtle-needs help

Greetings everyone.

I am a new to the RES community. Adopted two hatchlings back in August and have enjoyed them immensely.

They currently reside in a small 'lagoon' that only usually has about 3 gallons of water. However, over the weekend, I purchased a 55-gallon tank.

Here is where I need help.

I was going to purchase a Hagen Fluval 304 MSF Filter 260 GPH - 304 Msf - For Tanks Up To 70 Gallons.

What else do I need to really get going? I already have the UVA & UVB lamps and I'm also purchasing a docking station for them. Also, I know I'll need a suitable heater to accommodate the 55-gallon tank, too.

Will I need to purchase any additional peripherals?

Everyone here seems to be quite knowledgeable and kind. I'm sure I'll find the answers to my questions.

Thanks, in advance, for your help
Alzdman
 
Posts: 8
Joined: Jan 23, 2006
Location: Raleigh, NC

Post Posted: Mon Jan 23, 2006 3:21 pm   

Sounds like you've got all the essentials. You'll also need a thermometer for checking basking and water temps. Maybe some fake plants for them to rest on while they get used to having deep water. Large river rocks look nice on the bottom but they're not a necessity.
The things that come to those who wait may be the things that were left by those who got there first - Steven Tyler
User avatar
jenaero
Moderator
 
Posts: 3606
Joined: Apr 11, 2005
Location: Thorold, Ontario, Canada

Post Posted: Mon Jan 23, 2006 3:55 pm   

here's a very brief guide on what you need:

http://www.redearslider.com/res-guide.pdf

For filters, you may want to look at the Filstar XP3 instead of the Fluval.
User avatar
steve
Site Admin
 
Posts: 31561
Joined: Apr 11, 2005
Location: New York, NY
Gender: Male

Post Posted: Mon Jan 23, 2006 5:58 pm   

Very much appreciated
Alzdman
 
Posts: 8
Joined: Jan 23, 2006
Location: Raleigh, NC

Post Posted: Tue Jan 24, 2006 1:13 pm   

Thanks for your suggestion regarding the Filstar XP3 as opposed to the Fluval. It's good for up to 175 gallons. Pretty strong. (The fluval is only for 70 gallons or less).

My question is this: Is it worth spending the extra money? What benefits would you point out?

And, how do the filters work? Do they come with some sort of filtration medium? I don't have a clear understanding of how they'll be installed.

Sorry if this is redundant.
Alzdman
 
Posts: 8
Joined: Jan 23, 2006
Location: Raleigh, NC

Post Posted: Tue Jan 24, 2006 2:46 pm   

I think it's worth the extra money (it shouldn't be that much more expensive). Aside from being able to handle more water, it has larger media baskets and is easier to clean. Priming seems to be easier and I personally think there are design flaws with the Fluval case.
User avatar
steve
Site Admin
 
Posts: 31561
Joined: Apr 11, 2005
Location: New York, NY
Gender: Male


Return to Habitat - Indoor

Who is online

Users browsing this forum: No registered users and 23 guests