Equipment Review and Discussion :: Aquarium Water Heaters

Various accessories and equipment discussed here.

Post Posted: Wed Mar 04, 2009 1:16 pm   Aquarium Water Heaters

Hi currently i have two tanks filled with water for my turtles. One tank is 80 gallons and the other is 125 gallons. These tanks both have turtles in them. What heaters would be adequate to heat these tanks???
1 Pearl River Map-Carnage
1 Missisippi Map-Dr.Octopus
1 Western Painted- Cyclops
1 Japanese Pond-Nightcrawler
1 Texas Map Turtle-Flash
1 Savannah Monitor-Timon
1 Albino Red Corn Snake-Mr. Pockets
1 Bearded Dragon- Havoc(6 fbnewts7fbtoads)
User avatar
pickerbp22
 
Posts: 263
Joined: Feb 8, 2009
Location: long island, new york

Post Posted: Wed Mar 04, 2009 1:58 pm   

If your room temperature is in the 70s, then you should be able to get away with a 300W for each. If your room temp is usually cooler than that, then you may need a secondary heater for the 125 gallon. I use a 300W each in my 75 and 90 gallon tanks.
­Ralpheal, "The 'L' is silent."
Frankie, "Young at heart."
User avatar
BullDog
Senior Member
 
Posts: 3889
Joined: Jun 21, 2006
Location: BC, Canada

Post Posted: Wed Mar 04, 2009 4:48 pm   

Petsmart had this awesome all pastic Fluval filter for a 125 gallon tank for only $55 on sale. It had a digital LCD that showed the temp too.
I build acrylic ATBAs.
Rubicon
 
Posts: 664
Joined: Jul 7, 2008
Location: Fort Bragg, NC.
Gender: Male

Post Posted: Wed Mar 04, 2009 8:47 pm   

just make sure the heaters are shatter proof, most are.
I've always wanted to buy some visitherm heaters, just because I've seen it recommended so many times, but I've never had the need since my first heater
-Gabe:D

1.0.1 RES - Raphael & Speedy Claxter

Egg Crate: (n.) turtle owner's best friend, (2) also known as light diffuser, (3) found in local hardware stores in the lighting section
User avatar
Raphulk
 
Posts: 853
Joined: Dec 30, 2007
Location: sunny california

Post Posted: Wed Mar 04, 2009 10:55 pm   

my heater has little black fish pics on it and I noticed they are falling off in the water.... its a submersible heater so I thought that was kind of odd....
Charissa =)
1 RES-Momo
1 Chihuahua-Lily
1 Male Beta-Max
1 New ferret -Riko
lunabebe4
 
Posts: 191
Joined: Jan 12, 2009
Location: Seattle,WA

Post Posted: Thu Mar 05, 2009 12:37 am   

anyone heard of THEO heaters
1 Pearl River Map-Carnage
1 Missisippi Map-Dr.Octopus
1 Western Painted- Cyclops
1 Japanese Pond-Nightcrawler
1 Texas Map Turtle-Flash
1 Savannah Monitor-Timon
1 Albino Red Corn Snake-Mr. Pockets
1 Bearded Dragon- Havoc(6 fbnewts7fbtoads)
User avatar
pickerbp22
 
Posts: 263
Joined: Feb 8, 2009
Location: long island, new york

Post Posted: Thu Mar 05, 2009 1:02 am   

http://cgi.ebay.com/NEW-300W-FLUVAL-E-S ... dZViewItem

SUPER easy adjustment
Plastic cover to prevent burning
Digital LCD provides accurate temp output
I build acrylic ATBAs.
Rubicon
 
Posts: 664
Joined: Jul 7, 2008
Location: Fort Bragg, NC.
Gender: Male

Post Posted: Thu Mar 05, 2009 1:26 am   

pickerbp22 wrote:anyone heard of THEO heaters


Yes. i have two of them, they both run perfectly and are very reliable. I would recommend them to anyone.

I have had a visi therm stealth as well and the thermostat went out after about 5 months.
http://chrisredearslider.blogspot.com/
1.0 Red Ear Slider-Squirt
37g-Dwarf Gourami/Peaceful Comm. tank
1.0 Axolotl-Axle
0.1 Dog-Leia
User avatar
Chrisbarnett
 
Posts: 2399
Joined: Dec 26, 2007
Location: Cali

Post Posted: Thu Mar 05, 2009 1:27 am   

good thanks chris im gettin them
1 Pearl River Map-Carnage
1 Missisippi Map-Dr.Octopus
1 Western Painted- Cyclops
1 Japanese Pond-Nightcrawler
1 Texas Map Turtle-Flash
1 Savannah Monitor-Timon
1 Albino Red Corn Snake-Mr. Pockets
1 Bearded Dragon- Havoc(6 fbnewts7fbtoads)
User avatar
pickerbp22
 
Posts: 263
Joined: Feb 8, 2009
Location: long island, new york

Post Posted: Thu Mar 05, 2009 1:29 am   

You're welcome.
http://chrisredearslider.blogspot.com/
1.0 Red Ear Slider-Squirt
37g-Dwarf Gourami/Peaceful Comm. tank
1.0 Axolotl-Axle
0.1 Dog-Leia
User avatar
Chrisbarnett
 
Posts: 2399
Joined: Dec 26, 2007
Location: Cali

Post Posted: Thu Mar 05, 2009 3:08 pm   

i bought a theo 400 watt and a theo 300 watt. also ordered a python no spill clean n fill. im excited. all i need to buy next is a beast filter. thinkin xp4 or fx5
1 Pearl River Map-Carnage
1 Missisippi Map-Dr.Octopus
1 Western Painted- Cyclops
1 Japanese Pond-Nightcrawler
1 Texas Map Turtle-Flash
1 Savannah Monitor-Timon
1 Albino Red Corn Snake-Mr. Pockets
1 Bearded Dragon- Havoc(6 fbnewts7fbtoads)
User avatar
pickerbp22
 
Posts: 263
Joined: Feb 8, 2009
Location: long island, new york

Post Posted: Thu Mar 05, 2009 7:53 pm   

I just setup my XP4. Man what an awesome filter. I was looking at the FX5 but the thing is just so big. I opted for the XP4 (Rated for 265gal tanks, great cust service, 450GPH).
I build acrylic ATBAs.
Rubicon
 
Posts: 664
Joined: Jul 7, 2008
Location: Fort Bragg, NC.
Gender: Male

Post Posted: Thu Mar 05, 2009 7:59 pm   

Yea but if you can afford the size, the FX5 would be a better way to go. Loaded down with media it still pumps about 625-650GPH.
http://chrisredearslider.blogspot.com/
1.0 Red Ear Slider-Squirt
37g-Dwarf Gourami/Peaceful Comm. tank
1.0 Axolotl-Axle
0.1 Dog-Leia
User avatar
Chrisbarnett
 
Posts: 2399
Joined: Dec 26, 2007
Location: Cali

Post Posted: Thu Mar 05, 2009 8:23 pm   

oh well when its not that much of a difference in price on ebay! i can go with the fx5 awesome
1 Pearl River Map-Carnage
1 Missisippi Map-Dr.Octopus
1 Western Painted- Cyclops
1 Japanese Pond-Nightcrawler
1 Texas Map Turtle-Flash
1 Savannah Monitor-Timon
1 Albino Red Corn Snake-Mr. Pockets
1 Bearded Dragon- Havoc(6 fbnewts7fbtoads)
User avatar
pickerbp22
 
Posts: 263
Joined: Feb 8, 2009
Location: long island, new york

Post Posted: Thu Mar 05, 2009 9:12 pm   

Cool. Another downside for me was how much media the FX5 required. Either way you'll be happy! My painter will live the rest of her life in the 75Gallon so the XP4 is fine for her. I'll probably get an FX5 to replace my 404 once I upgrade the sliders.


Good luck!!!
I build acrylic ATBAs.
Rubicon
 
Posts: 664
Joined: Jul 7, 2008
Location: Fort Bragg, NC.
Gender: Male


Return to Equipment Review and Discussion

Who is online

Users browsing this forum: No registered users and 61 guests