Habitat - Indoor :: Basking light question

Turtle tank setups and other indoor configurations.

Post Posted: Mon May 02, 2005 8:38 pm   Basking light question

I purchased a Exo Terra basking light bulb (50 watt) but I still need a lamp to put it in. Can you put that type of light bulb in something like a regular metal desk lamp (that takes that wattage of bulb of course), or do you need to purchase one of the lamps that they sell at the pet stores? The reason I ask is that 1) it's much cheaper that way and 2) it will be sitting on the shelf next to the tank in my living room, so the better the lamp itself looks the better. I'm going to purchase it on my lunch break tomorrow.
User avatar
tissigirl
 
Posts: 254
Joined: Apr 18, 2005
Location: KY

Post Posted: Mon May 02, 2005 10:35 pm   

Iv've seen many people use a desk lamp. :lol:
-Kristy
User avatar
punkiemichelle
 
Posts: 77
Joined: Apr 11, 2005
Location: San Diego, CA

Post Posted: Mon May 02, 2005 10:48 pm   

I use a clamp lamp that I bought at the pet store for about $20. I've heard you can find the same sort of thing at Walmart or Home Depot (or whatever home improvement type store you have in your area) for a bit cheaper than that.
The things that come to those who wait may be the things that were left by those who got there first - Steven Tyler
User avatar
jenaero
Moderator
 
Posts: 3606
Joined: Apr 11, 2005
Location: Thorold, Ontario, Canada

Post Posted: Tue May 03, 2005 12:15 am   

The problem with using a regular lamp as a basking lamp, is that it has plastic components that will melt with all the heat that the bulb is producing, I know this from experience, I had one melt on me, not a pretty sight :D , if and when you do get a lamp, make sure that it has a ceramic base so that it does not melt on you, you will probably spent the money on a new lamp when it melt that you will pay for a ceramic base one that one time.

A regular lamp is fine for a UV bulb since the UV bulb (fluorescent coil) does not produce enough heat to melt any plastic on the lamp, I use a ceramic base basking clamp lamp for the basking light, and a regular lamp for my UV full spectrum fluorescent coil bulb. :D
User avatar
STRAYKINGFISHER
 
Posts: 491
Joined: May 2, 2005
Location: TEXAS-USA

Post Posted: Wed May 04, 2005 5:04 pm   

At Petsmart they have "Flukers Clamp lamp".

1 is rated to 75 watts $9.99 USD
1 is rated at 100 watts $14.99 USD

All metal and has a ceramic base.

Good Luck
User avatar
BigCT
 
Posts: 208
Joined: Apr 28, 2005
Location: Vancouver, WA

Post Posted: Wed May 04, 2005 6:30 pm   

That's what I use..never had a problem with it :)
The things that come to those who wait may be the things that were left by those who got there first - Steven Tyler
User avatar
jenaero
Moderator
 
Posts: 3606
Joined: Apr 11, 2005
Location: Thorold, Ontario, Canada

Post Posted: Wed May 04, 2005 7:20 pm   

:?: Jen
Do you use a full tube flourescent bulb or the coil variety? Any preference?
User avatar
RES Tampa
 
Posts: 132
Joined: Apr 11, 2005
Location: Tampa, Florida

Post Posted: Wed May 04, 2005 8:53 pm   

You can get a brooder lamp with a ceramic base, clamp, and dome that's rated for about 250 watts at Lowes for about $9.50. Hardware stores sometimes have them as well. I recently got a brooder lamp at a Tractor Supply Company for $7.99. They're as good as (or better) than the ones you can buy at pet stores.
marisa
Retired Mod
 
Posts: 12993
Joined: Apr 21, 2005
Location: CT, USA

Post Posted: Wed May 04, 2005 9:37 pm   

Tampa, I use the TRex UV Heat bulb..it's a uva/uvb combo
The things that come to those who wait may be the things that were left by those who got there first - Steven Tyler
User avatar
jenaero
Moderator
 
Posts: 3606
Joined: Apr 11, 2005
Location: Thorold, Ontario, Canada

Post Posted: Fri May 06, 2005 1:28 am   

Hi Tissi,

Just be sure that the lamp is close enough, but not too close, to the tank to sufficiently heat the basking area. Since you mentioned that you wanted to sit it on a desk beside the tank, I wanted to make that comment. Also, I've read that over distance, the UVA and UVB rays actually diminish so you want to make sure that the light is again, close enough but not too close to the tank. Anyone else in here hear of that?

I read it shortly after I got my greenies but didn't pay a lot of attention to it because I was having RES information overload at the time. Reading this on the basking light and Jen mentioning that she uses the combo bulb made me think of that. I'll see what I can find on the subject and post it for everyone if there is any merit to what I read. Someone please direct me to the sticky if there is one on this topic?
User avatar
judo42
 
Posts: 68
Joined: May 2, 2005
Location: San Diego, CA

Post Posted: Fri May 06, 2005 12:56 pm   

I was wondering the same thing Judo. I have a hood on my tank so I can't really attach it to the top of it, so I have no choice but to have it go thru the glass. It seems to be working as far as heating the area. My turtle wouldn't go onto his basking dock until I put the lamp there, and now he's up there all the time! But I was wondering if it affected the UV rays. Does anyone know???
User avatar
tissigirl
 
Posts: 254
Joined: Apr 18, 2005
Location: KY

Post Posted: Fri May 06, 2005 1:07 pm   

Glass and plastic are definite filters for UV rays. Jen may know for sure, but I believe that the glass/plastic/acrylic is a barrier for the UVB rays (which a crucial for a healthy greeny) but allows the UVA to pass on through.
Maybe you can leave the lid of your hood open for 10-12 hours a day for the UV light to filter in through. Just be sure that the water level isn't so high that the little fella can climb out! :)
User avatar
judo42
 
Posts: 68
Joined: May 2, 2005
Location: San Diego, CA

Post Posted: Fri May 06, 2005 2:41 pm   

yep..all of those things block uvb rays. He'll still get the heat but that's all.
The things that come to those who wait may be the things that were left by those who got there first - Steven Tyler
User avatar
jenaero
Moderator
 
Posts: 3606
Joined: Apr 11, 2005
Location: Thorold, Ontario, Canada

Post Posted: Sat May 07, 2005 12:42 pm   

Even a screen with holes that are really small (less than 1/8 of an inch) will filter out quite a bit of rays. Conventional UVB lights shouldn't be place more than 12 inches from your turtle, and 6-8 inches is best. For the mercury vapor bulb, you should follow the instructions that come with it. They give off a lot of heat and you don't want to cook your turtle. They do give off more UVB rays than conventional lights, though, so the greater distance isn't a problem for UVB metabolism.

If I'm not mistaken, UVA light is the light that's visable to us all.
marisa
Retired Mod
 
Posts: 12993
Joined: Apr 21, 2005
Location: CT, USA


Return to Habitat - Indoor

Who is online

Users browsing this forum: No registered users and 28 guests